Top Most Common Causes of Fire & Flood Damage Restoration
Surprisingly, one of the most common causes of Flood Damage Restoration Hobart is caused by humans. A minor inconvenience like a toilet overflowing can cause serious discomfort, not to mention ruin you’re flooring and furniture.
Water leakage or overflows are responsible for over 25% of reported water damage cases every year. Not only that, but 20% of these incidents happen in the bathroom, which is the most common room for overflows to occur in.Water damage restoration Hobart is a difficult process and we will require plenty of things including time, expertise and tools so we recommend that you avoid doing this by yourself if possible.
Since faucets are responsible for up to 70% of all water leaks, it’s essential that these plumbing fixtures are working properly and at their best performance. However, even if your home has the latest water-saving devices installed, you might find yourself in a situation where your toilet or faucet is about to overflow.
Understanding The Cause Behind Flood Damage Restoration
The first step to take when you spot water leaking from your faucet’s spout is understanding what caused it. Here are a few of the most common causes:
- A loose washer or a worn-out seat in the faucet valve.
- A faulty flush handle or flapper, which is the most common cause of toilet overflows.
- A leaky and worn-out sink basket or strainer that lets water seep through the drain holes.
- Loose pipe joints and loose connection between the faucet and the spout.
- Overflowing caused by DIY repair attempts, usually when someone closes shut off valves without shutting down home’s main water supply first.
Preventing Water Damage Restoration
The best way to avoid damage is to avoid getting your home wet in the first place. If you’re in the process of repairing or replacing any water-using appliances, always remember to turn off the main shutoff valve first. Water Damage restoration Hobart focuses on repairing the damages done to the building.
Another smart way to avoid leaks is by turning on your faucets’ aerators. These small attachment pieces mix air with the flowing water so that it doesn’t come out in a strong stream that’s capable of carrying large particles, including dirt and rust, into the drainage system. As a result, they encourage small particles to settle out so they can be easily removed from your water heater or drain by flushing them through with clean water.
Inspecting for Water Leaks
Whether you have a leaking toilet or faucet, you need to stop it from leaking as soon as possible. To do so, you need to inspect your water-using appliances thoroughly to see where the leak is coming from. If it’s a faucet, for example, you’ll probably find its culprit in the spout or handle area.When Water Extraction Melbournebecomes necessary Water Damage restoration is what you need and Water damage restoration can be sorted by Water Damage Repair Hobart.
Here Are Some Steps to Take That Will Help You Locate Leaks:
- Close shutoff valves to any water-using appliances that are not currently in use.
- Pour a few cups of water into the offending appliance and wait for about 10 minutes. If it takes more than 5 minutes for the sound of running water to stop, you’re probably dealing with either a loose washer or worn-out seat in the faucet or toilet.
- If the sound stops quickly, inspect the spout for any cracks that could be letting water seep through. Also check for loose valves and loose connection between the faucet handle and base.
- The culprit of a leaking sink is usually the faucet. If you suspect that the washer needs to be replaced, first turn off the shutoff valves under the sink then unscrew the handle and remove it.
- Take apart all other parts of your faucet including, if necessary, the bonnet nut, packing nut and stem assembly (if they’re readily accessible), cartridge unit (if it’s removable) or spindle.
- Check for cracked seats or washers before buying replacements; also check for loose nuts or clips around connection joints.
- Take note of your faucet or toilet brand and model number if it’s not one of the common brands like Kohler, Delta, American Standard and Moen. This will help you choose compatible replacement parts, which can be easily found at home improvement centres.
- If you’re not comfortable with DIY repairs, call in a professional to do the task for you. They can identify problems quickly and recommend solutions that suit your needs.Water extraction Melbourne helps in making the home dry and also helps with bad odor from wet carpets, floors etc.
Preventing Home Water Damage
As with most types of water damage, preventing home water damage is always easier than fixing it. Here are some tips on how to do that:
- Inspect your faucets and toilets regularly for any leaking signs. Toilets are usually the culprits, especially when their flush handles or tanks are loose, when the fill valve is faulty, or when the flapper fails to shut off water completely.
- Check for any moisture on walls and floors near plumbing fixtures. If you don’t want to check every day, inspect your home’s basement, crawlspace and garage for any signs of standing water during rain or snowfall.
- If you see any signs of water pooling, turn off the main shutoff valve immediately to prevent further damage. Water can seep through concrete walls and porous concrete floors to weaken them, causing your foundation to shift out of place. This will lead to bigger issues like cracks in interior or exterior walls; buckled floors; sagging doors and windowsills; and even structural damage like sinking, leaning or bulging walls.
- Toilets are usually the first things to show signs of leakage—you might find wet spots on floors surrounding them. Check that water is not leaking from floor drains around toilets or running along concrete walls towards them. Also check that water is not pooling on the floor around your toilet.
- Look under the house for signs of wet insulation, warped floor joists or walls, soft spots in wood floors or sagging floors around bathroom areas.
- Use a moisture meter to look for any moisture on studs and joists in the basement or crawlspace.
Look for any water seeping through your foundation, which can be easier to spot during winter when snow provides a good contrast. Also take note if you see any parts of your foundation settling down or leaning towards the house. These are signs that there is too much moisture underneath your home and should be addressed immediately by a home inspector and/or foundation Flood Damage Restoration Hobart contractor.
To Read Our Exclusive Content, Sign up Now.
$5/Monthly, $50/Yearly