Top AirPods Hacks You Should Know!
If you’re one of the millions of people who have AirPods, you know that they can be a little bit finicky. But the truth is, with a few simple hacks, you can make them work even better for you. In this article, we’ll share some top AirPods hacks that you should know about. So keep reading to learn more!
How to Get More Battery Life Out of your AirPods?
AirPods offer great battery life, but there are a few ways to get even more out of them. First, make sure that your AirPods are connected to the charging case. Then, close the case and hold down the button on the back of the case until the LED light starts flashing. Finally, release the button and wait for the AirPods to start charging. You can also use this method to put your AirPods into pairing mode.
Another way to get more battery life out of your AirPods is to use the low-power mode. To do this, go to the Bluetooth settings on your iPhone and find the AirPods in the list of devices. Tap on the “i” next to the AirPods and toggle the Low Power Mode switch to ON. This will disable some features, but it will also extend the battery life of your AirPods.
Finally, if you are not using your AirPods and they are just sitting in your case, you can put them into standby mode. To do this, open the case and hold down the button on the back of the case until the LED light turns off. This will put your AirPods into a low-power state and they will not be able to connect to your iPhone until you wake them up.
These are just a few of the ways that you can get more battery life out of your AirPods.
How to Clean your AirPods?
Cleaning your AirPods is a quick and easy process. First, remove the AirPods from their case. Next, use a soft cloth to wipe away any dirt or debris that may be on the earbuds or case. If needed, you can lightly dampen the cloth with water. Finally, be sure to allow the AirPods and case to air dry before putting them back in use.
If you want to give your AirPods a deeper clean, you can use a cotton swab dipped in rubbing alcohol. Gently wipe the surface of the AirPods with the cotton swab, being careful not to get any moisture inside the earbuds. Again, be sure to allow the AirPods to air dry completely before using them.
How to Use AirPods with Different Devices?
If you have an iPhone and an iPad, or any other Apple device for that matter, you can use AirPods with both. Just open the Settings app on your iOS device and select Bluetooth. Under My Devices, you should see your AirPods listed. Tap on the AirPods and toggle the switch to enable them. You can now use your AirPods with any of your Apple devices.
If you have an Android phone, you can use AirPods with it by using a Bluetooth adapter. Just plug the Bluetooth adapter into the headphone jack on your Android phone, and then pair the AirPods with the adapter. You can now use your AirPods with any of your devices that have Bluetooth capability.
AirPods are not just for listening to music or making phone calls. You can also use them to listen to audiobooks, podcasts, and TED Talks. Just open the TED app and select one of the talks that you want to listen to. Once the talk starts playing, double-tap on either earbud to start playing the talk in stereo. To pause the talk, just double-tap again.
What to Do if one AirPod Dies Faster than the 0ther?
If one of your AirPods dies faster than the other, there are a few things you can do.
The first thing you should try is to place the dead AirPod in the charging case and close the lid. Plug in the charging case to a power source and let it charge for a few hours. Once it’s charged, open the lid and try using the AirPods again.
If that doesn’t work, try this next step. Go into your Settings and select “Bluetooth.” Under “My Devices,” find your AirPods and select “Forget This Device.” Then, open up the charging case and hold down the button on the back until the LED flashes white. Put your AirPods back in your ears and they’ll automatically connect to your device.
If that still doesn’t work, you can try resetting your AirPods. Unplug the charging case from any power source and wait for 30 seconds. Plug it back in and wait for the white light on the front of the case to turn green. Open the lid of the case and hold down the button on the back until the LED flashes white. Put your AirPods back in your ears and they’ll automatically connect to your device.
If you’ve tried all of these steps and one AirPod still dies faster than the other, you may need to replace your AirPods. You can contact Apple Support for help with this.
How to Get the Perfect fit with AirPods?
If you’re having trouble getting a good fit with your AirPods, don’t worry, you’re not alone. A lot of people have found that the default fit leaves something to be desired. Here are a few tips to help you get the perfect fit:
- Make sure the AirPods are seated correctly in your ears. They should fit snugly and not fall out easily.
- The stems on the AirPods should stick out of your ears slightly, so make sure they’re not pushed too far back.
- If the AirPods are too tight or too loose, try adjusting the size of the ear tips. You can do this by pulling on the stem of the ear tip until it comes off, then adjusting it to fit your ear before putting it back on.
Hopefully, these tips will help you get a comfortable and secure fit with your AirPods!
There you have it! Our top AirPods hacks that you should know. We hope these tips help you get the most out of your AirPods and make them work for you. Do you have any favorite hacks that we missed? Let us know in the comments below and don’t forget to share this post with your friends and followers.
To Read Our Exclusive Content, Sign up Now.